Latest sand blasting Tenders | Government sand blasting Tenders

Central Government And Public Sector

CTN :45727605

28 Jul, 2026 NA

Bangalore - Karnataka

Tender For heavy duty circular magnet with following specification 1. application- circular lifting magnet suitable for lifting cold as well as hot ferrous material up to 600?c in a foundry environment 2. operating voltage-220vdc 3. cold current- max.105 amps 4. cold power- min. 18.5 kw 5. self weight- total self-weight of the magnet shall not exceed 5 tons, inclusive of suspension chain, master bail, lugs, pins, and all other accessories 6. duty cycle- min 50% at a 10-minute cycle 7. magnet diameter- 1650 mm with tolerance of -25.5 mm/+50 mm 8. minimum lifting capacities- the lifting capacities of the magnet shall not be less than the following: a) pig iron (1 hm)-2359 kg, b) pig iron (2 broken)-1225 to 1497 kg, c) steel turnings-771 kg 9. magnet conductor & insulation- magnet conductor shall be made of premium electrical-grade copper, minimum copper purity shall be 99.99%, coil insulation shall be class "h" 10. magnet body construction- the magnet shall be made of high-grade cast steel, of welded construction, and shall be waterproof and mechanically robust, suitable for heavy-duty foundry applications 11. bottom plate & sealing plate- a)heavy duty non-magnetic bottom plate and sealing plate shall be provided,b) material shall be wear-resistant, work-hardened manganese steel, c)plates shall protect the coil from damage due to impact, abrasion, and bumping 12. suspension chain assembly- a)heavy duty, annealed alloy steel, 3-legged chain shall be provided, b)chain shall be complete with a master bail suitable for crane hook suspension. heavy-duty lugs & pins shall be provided toconnect the chain to the magnet 14. surge protection? a suitably rated surge suppressor shall in the magnet circuit 15. testing & test certificates? all relevant tests and test certificates shall be submitted along with the supply. specn: 1. cold current: max 105amps, 2. cold power: 18.5 kw 3. self weight less than 5ton inclusive of chain, bail and other accessories. duty cycle: min. 50% at 10minutes cycle 5. diameter of magnet: 66inches -1 inch +3inch. 6. lifting capacities shall not be less than (a) pig iron1hm - 2359kgs) (b) 2 broken pieces: 1225 (c) steel turnings: 771kg ]

corporations/Associations/Others

CTN :45690586

29 Jun, 2026 3.02 Lacs

Vijayawada - Andhra Pradesh

Tender For supply, delivery of spare parts and repair foundry work to the vehicle no ap 39 tp 7354 water tanker leak, chassis problem. (rc.v1-111776/2026- 1.5 inch *.075 inch square pipe 20 feet , 1.5 inch angular , 1st and 5th chassies cross member , 2nd & 4th cross member , 3rd cross member , 4 inch chammel 20 feet , 8*4 feet 2mm thick ms sheet , 8*4 feet 4mm thick al sheet , 8*4 feet 4mm thick ms sheet , 8*5 feet 4mm thick ms sheet , ap 39 tp 7354 water tanker chassies problem, platform welding. , body red oxide coating , bolts & nuts , full platform welding , gas cutting , mechanical & electrical charges , ogggilu , sub chassis 3rd cross member , sub chassis clap , sub chassis cross members 1st & 5th , sub chassis cross members 2nd & 4th , sub chassis foundry work drilling tapping & welding work , water tank removing & fixing

State Government

CTN :45696572

01 Jul, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

CTN :45678822

07 Jul, 2026 NA

Hyderabad - Telangana

Tender For supply of portable sand blasting machine with accessories - portable sand blasting hopper, air compressor, abrasive garnet sand, air blaster helmet with hose, safety hand gloves, operator's safety suit, gum boot

CTN :45419698

01 Jul, 2026 5.04 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : supply of sand blasting annodising phosphating painting mechanical components of tnpo-160

CTN :45419910

01 Jul, 2026 12.29 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : supply of sand blasting, anodizing, phosphating painting etc of mechnical components of tnpo-168b drg. no. au8

Central Government/Public Sector

CTN :44521322

01 Jul, 2026 36.10 Lacs

Bangalore - Karnataka

Tender For corrigendum : replacement of old and damaged external sanitary lines material gate widening work and various other civil works inside foundry and forge division hal bc

Central Government/Public Sector

CTN :45633004

22 Jul, 2026 20.26 Lacs

Multi City - Multi State

Tender For extension of sand blasting room at hal, barrackpore.

CTN :45092677

02 Jul, 2026 57.81 Crore

Nagpur - Maharashtra

Tender For corrigendum : civil work for extension of foundry and extrusion section for new 10000 ton capacity press along with up and down stream facilities project at ordnance factory ambajhari nagpur